FixVault
Home › Kia › 2016 › Sedona EX › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System › Barometric Pressure Sensor (BPS) › Repair Procedures › Inspection

Repair Procedures: Inspection

  1. Connect the GDS on the Data Link Connector (DLC).
  2. Measure the output voltage of the BPS at idle and IG ON.
    BPS PRESSURE OUTPUT VOLTAGE

    Pressure [kPa (kgf/cm2 , psi)] Output Voltage (V) [Ref=5V]
    10.0 (0.01, 0.15) 0.50
    55.0 (0.56, 7.98) 2.21
    115.0 (1.17, 16.9) 4.50
About FixVault