FixVault
Home › Kia › 2016 › Sedona EX › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System › Manifold Absolute Pressure Sensor (MAPS) › Repair Procedures › Inspection

Repair Procedures: Inspection

  1. Connect the GDS to the Data Link Connector (DLC).
  2. Measure the output voltage of the MAPS at idle and IG ON.
    MAPS OUTPUT VOLTAGE AT IDLE

    Pressure [kPa (kgf/cm2 , psi)] Output Voltage (V) [Ref=5V]
    20.0 (0.20, 2.90) 0.79
    46.66 (0.47, 6.77) 1.84
    101.32 (1.03, 14.7) 4.0
About FixVault