FixVault
Home › Kia › 2016 › Sedona EX › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System › Manifold Absolute Pressure Sensor (MAPS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the Manifold Absolute Pressure Sensor connector (A).
  3. Remove the mounting bolt (B), and then vertically remove the sensor from the surge tank.
Fig 1: Locating Manifold Absolute Pressure Sensor Connector & Mounting Bolt
G11856641Courtesy of KIA MOTORS AMERICA, INC.
About FixVault