FixVault
Home › Kia › 2016 › Sedona L › Repair and Diagnosis › External Pages › Different car › Section 176 (Electronic Stability Program (Esp) System) › Front Wheel Speed Sensor › Repair Procedures › Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia K900. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the connector (A) after removing the front wheel speed sensor clip.
    Fig 1: Locating Front Wheel Speed Sensor Clip Connector
    G11800879Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the front wheel speed sensor.

    (Proceed to Driveshaft and Axle - "FRONT HUB/KNUCKLE/TONE WHEEL ")

  3. Installation is the reverse of removal.
About FixVault