FixVault
Home › Kia › 2016 › Sedona LX › Repair and Diagnosis › Restraints › Air Bag, SRS › Supplemental Restraint System Control Module (SRSCM) & Sensors › SRS Control Module (SRSCM) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Remove the ignition key from the vehicle.
  2. Disconnect the battery negative cable and wait for at least thirty seconds before beginning work.
  3. Remove the floor console.

    (Refer to Body - "FLOOR CONSOLE ")

  4. Pull up the lock of the SRSCM connector, and then disconnect the connector (A).
    Fig 1: Disconnecting Connector
    G11857729Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the SRSCM mounting bolts (3EA) from the SRSCM, and then remove the SRSCM.
    CAUTION: You must remove or install SRSCM or other SRS components with the ignition switch OFF to avoid accidental airbag deployment.
About FixVault