Repair Procedures: Inspection

1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column.
   Fig 1: Disconnect Ignition Switch Connector

   Courtesy of KIA MOTORS AMERICA, INC.
   Fig 2: Remove Key Warning Switch Connector From Steering Column

   Courtesy of KIA MOTORS AMERICA, INC.
2. Check for continuity between the terminals.
3. If continuity is not as specified, replace the switch.

Fig 3: Check Continuity Between Ignition Switch Connector Terminals

Courtesy of KIA MOTORS AMERICA, INC.