FixVault
Home › Kia › 2016 › Sorento L › Repair and Diagnosis › Engine Performance › System › Engine Control System Diagnosis - 2.4L (2 Of 3) › DTC P0607-00: Control Module Performance › Wiring Inspection › Terminal And Connector Inspection

Terminal And Connector Inspection

  1. Many malfunctions in the electrical system are caused by poor harness and terminals.

    Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage.

  2. Thoroughly check all connectors (and connections) for looseness, bending, corrosion, contamination, deterioration, and/or damage.
  3. Has a problem been found?

    YES 

    NO 

    • Using a GDS, check PCM software version and upgrade as necessary. If version is the newest one, check PCM for contamination, deterioration, or damage.
    • If the diagnostics have been performed correctly with no failure found, replace the PCM and then go to "Verification Of Repair " procedure.
About FixVault