FixVault

Rear Power Window Switch Inspection

WARNING: This page is about a different car, the 2016 Kia Forte5, 2016 Kia Forte Koup, and 2016 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear door trim panel.

    (Refer to Body - "REAR DOOR TRIM ")

  3. Disconnect the 8P connector from the switch.
    Fig 1: Inspect Rear Power Window Switch
    G11792387Courtesy of KIA MOTORS AMERICA, INC.
  4. Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.
    Fig 2: Rear Power Window Switch Continuity Reference Chart
    G11792388Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the power window switch(A) after loosening the screws.
Fig 3: Remove Power Window Switch Screws
G11792389Courtesy of KIA MOTORS AMERICA, INC.