Repair Procedure: Adjustment

TCM Adaptive Values Learning 

• TCM adaptive values learning: When shift shock occurs or parts related with the transaxle are replaced, TCM learning should be performed.
• In the following case, TCM learning is required.

• Automatic transaxle assembly replacement
• TCM upgrading or replacement
• Valve body replacement

TCM Adaptive Values Learning Procedure 

• Static learning (condition: ATF temperature 40~100°C (104~212°F)

1. Step on the brake, and then pause for 3 seconds each on "N" range and "D" range.
2. Repeat the above procedure four times.

Fig 1: Shift Lever Timing Pattern

Courtesy of KIA MOTORS AMERICA, INC.

• Driving learning

1. Drive the vehicle through all the gears. (1st → 2nd → 3rd → 4th → 5th → 6th)
   NOTE: Keep the throttle position (15~25%) steady while driving the vehicle.
2. Decelerate the vehicle by stepping on the brake (6th → 5th → 4th → 3rd → 2nd → 1st).
3. Repeat the above procedure four times.