Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.

Turn ignition switch OFF.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "BATTERY ")
Disconnect the solenoid valve connector (A).

Fig 1: Locate Solenoid Valve Connector
Courtesy of KIA MOTORS AMERICA, INC.
Measure the resistance between power terminal (5) and signal terminal (17).

Specification: 5.1 ± 0.3 Ω

Fig 2: Measure Resistance Between Terminals

Courtesy of KIA MOTORS AMERICA, INC.