FixVault
Home › Kia › 2016 › Soul ! › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.0L › Accelerator Position Sensor (APS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the mounting nuts (B).
    G11955545Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the cap (A)
    G11955546Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the mounting bolt (A), and then remove the accelerator pedal module.
    G11955547Courtesy of KIA MOTORS AMERICA, INC.
About FixVault