FixVault
Home › Kia › 2016 › Soul ! › Repair and Diagnosis › External Pages › Different variant/trim › Section 26 (Engine Control System - 1.6L) › Accelerator Position Sensor (APS) › Repair Procedures › Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the mounting nuts (B).
    G11950119Courtesy of
  4. Remove the cap (A)
    G11950120Courtesy of
  5. Remove the mounting bolt (A), and then remove the accelerator pedal module.
G11950121Courtesy of
About FixVault