Repair Procedures: Replacement

CAUTION:

Put on gloves to protect your hands.

NOTE:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.

Remove the floor console assembly.
(Refer to "FLOOR CONSOLE ASSEMBLY .")
Loosen the rear console cover mounting screws (A).

Courtesy of
Using a screwdriver or remover, remove the rear console cover (A).

Courtesy of
Install in the reverse order of removal.
Information
- Make sure the connector is connected properly.
- Replace any damaged clips.