DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible cause
DTC Strategy	Voltage Monitoring	External Noise Defected Pressure Sensor
Enable Condition	Under normal condition, Filtered input signal of sensor is higher than 15 bar for more than 2 sec. upon no brake and motor operation and not in low voltage condition
Warning Indicator Lamp Status	ESC (ESP) Warning Indicator Lamp "ON"
Clear Condition	Ignition "OFF" and then "ON" and Vehicle speed over 6 km/h (Approx. 3.7 mph) and BLS OFF and Master Cylinder Pressure less than 15 bar and Accelerator Pedal Position more than 20%