FixVault

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable (A).
  2. Disconnect the positive (+) terminals (B) from the battery.
  3. Remove the air cleaner. (Refer to "AIR CLEANER .")
  4. Remove the battery insulation pad.
  5. Remove the battery mounting bracket (C) by loosening the mounting bolt and then remove the battery (D).
    G11949923Courtesy of
  6. Remove the ECM. (Refer to "ENGINE CONTROL MODULE (ECM) .")
  7. Remove the battery tray (B) after removing the bolts (A).
G11949924Courtesy of