FixVault
Home › Kia › 2016 › Soul Base, Automatic Trans › Repair and Diagnosis › Electrical › Starter › Starting System - 1.6L › Starter Relay › Repair Procedures › Inspection

Repair Procedures: Inspection

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the fuse box cover.
  3. Remove the starter relay (A).
    G11949983Courtesy of
  4. Check for continuity between the terminals (30 and 87) using an ohmmeter.
    Terminal Resistance Measure
    30 - 87 1 MΩ or higher If there is continuity between the terminals, replace the relay.
    G11949984Courtesy of
  5. Apply 12V to the terminal 85 and ground to the terminal 86 and then check for continuity between the terminals (30 and 87).
    Terminal Resistance Measure
    30 - 87 1Ω or less If there is no continuity between the terminals, replace the relay.
    G11949985Courtesy of
  6. Install the starter relay.
  7. Install the fuse box cover.
About FixVault