Repair Procedures: Replacement

CAUTION:

NOTE:

When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.

Remove the cowl side trim.
(Refer to "COWL SIDE TRIM .")
Using a screwdriver or remover, remove the crash pad side cover [LH] (A).

Courtesy of
After loosening the mounting screws, then remove the crash pad lower panel (A) by using a screw driver.

Courtesy of
Disconnect the diagnosis connector (A).

Fig 1: Diagnosis Connector
Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.
Information
- Make sure the connector are connected in properly.
- Replace any damaged clips.