FixVault
Home › Kia › 2016 › Soul Base, Standard Trans › Repair and Diagnosis › Transmission › Transmission Control Systems › Manual Transaxle Control System - 1.6L › Control Shaft Complete › Repair Procedures › Installation

Repair Procedures: Installation

  1. Install in the reverse order of removal.
    NOTE:
    • When installing, set control shaft lever to neutral position.
      G11950325Courtesy of
    • When installing, apply the sealant as shown in the illustration below.

      Specified sealant: Anaerobic adhesives (for flange)

      G11950326Courtesy of
  2. After installing, check to be sure that this part operates as designed at each range of T/M side corresponding to each position of shift lever.
About FixVault