DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Check the input signal of inhibitor.	Connector status Short to in Switch circuit Open to in Switch circuit Misalignment of shift cable Inhibitor Switch EPCU
Enable Conditions	Ignition "ON" (Power Button LED "Red") Auxiliary battery voltage (9 - 16 V)
Threshold Value	Input of unclear range signal (Invalid Code, P-R, R-N, N-D, D-B) is detected and maintained for more than 10 seconds.
Diagnostic Time	4sec
DTC	Immediately
Service Lamp	Immediately