Repair Procedures: Installation

WARNING: This page is about a different car, the 2018 Kia Forte5 and 2018 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.
CAUTION:
- Before installing the pin, apply the grease to the joint pin.
- Use a new snap pin whenever installing.
After installing, bleed the brake system.
(Refer to BLEEDING OF BRAKE SYSTEM )
After be equipped perform bleeding air procedure in clutch release cylinder after pouring the brake fluid. [MT only].
(Refer to Clutch - "CLUTCH RELEASE CYLINDER ")