FixVault
Home › Kia › 2017 › Forte EX › Repair and Diagnosis › External Pages › Different car › Section 172 (Engine Control System) › ETC (Electronic Throttle Control) System › Repair Procedures › Inspection › ETC Motor

ETC Motor

WARNING: This page is about a different car, the 2017 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch "OFF" the ignition.
  2. Disconnect the ETC module connector.
  3. Measure resistance between the ETC module terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification:  0.3 - 100 Ω [20°C (68 °F)]

About FixVault