FixVault
Home › Kia › 2017 › Forte EX › Repair and Diagnosis › External Pages › Different car › Section 172 (Engine Control System) › Manifold Absolute Pressure Sensor (MAPS) › Repair Procedures › Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Kia Niro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
  2. Disconnect the manifold absolute pressure sensor connector (A).
  3. Remove the sensor (B) after loosening the mounting bolt from the intake manifold.

    Manifold Absolute Pressure Sensor Mounting Bolt: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    Fig 1: Disconnecting Manifold Absolute Pressure Sensor Connector
    G12335777Courtesy of KIA MOTORS AMERICA, INC.
About FixVault