FixVault
Home › Kia › 2017 › Forte EX › Repair and Diagnosis › External Pages › Different car › Section 62 (Engine Control System - 2.0L GDI) › Variable Intake Solenoid (VIS) Valve › Repair Procedures › Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2018 Kia Forte5 and 2018 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the Ignition Switch OFF.
  2. Disconnect the VIS Valve connector.
  3. Measure resistance between VIS Valve terminals 1 and 2.

    Specification:  30.0 - 35.0 [20°C (68°F)]

About FixVault