Repair Procedures: Disassembly

WARNING: This page is about a different car, the 2017 Kia Forte5 and 2017 Kia Forte Koup. However, it is still accessible from the selected car via links, so may be relevant.

Remove the pulley (A) after loosening the mounting bolt.

Fig 1: Locating Pulley Mounting Bolt
Courtesy of KIA MOTORS AMERICA, INC.
Remove the OAP cap (A).

Fig 2: Locating OAP Cap
Courtesy of KIA MOTORS AMERICA, INC.
Using the SST (09373-27000), remove the OAP pulley (A).

Fig 3: Removing OAP Pulley Using SST (09373-27000)
Courtesy of KIA MOTORS AMERICA, INC.
Remove the rear cover (A) after removing nuts (B).

Fig 4: Locating Rear Cover With Nuts
Courtesy of KIA MOTORS AMERICA, INC.
Remove the mounting bolts (A) and the regulator assembly (B).

Fig 5: Locating Regulator Assembly And Mounting Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Remove the slip ring guide (A) after pulling it.

Fig 6: Removing Slip Ring Guide
Courtesy of KIA MOTORS AMERICA, INC.
Unsolder the 3 stator leads (A).

Fig 7: Locating Stator Leads
Courtesy of KIA MOTORS AMERICA, INC.
Remove the 4 through bolts (A).

Fig 8: Locating Through Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the rotor (A) and housing (B).

Fig 9: Locating Rotor And Housing

Courtesy of KIA MOTORS AMERICA, INC.