Repair Procedures: Replacement

WARNING: This page is about a different car, the 2018 Kia Forte5 and 2018 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative (-) battery terminal.
Recover the refrigerant with a recovery/charging station.
Disconnect the A/C pressure transducer connector (A).

Fig 1: Disconnecting A/C Pressure Transducer Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the A/C pressure transducer (A).
Tightening Torque:

10.0 - 12.0 N.m (1.02-1.22 kgf.m, 7.4-8.8 lb.ft)

Fig 2: Removing A/C Pressure Transducer
Courtesy of KIA MOTORS AMERICA, INC.
CAUTION:
- Be careful not to bend the liquid & suction pipe.
Install in the reverse order of removal.
NOTE: When installing, replace it with a new O-ring (A).

Fig 3: Installing O-Ring
Courtesy of KIA MOTORS AMERICA, INC.