FixVault
Home › Kia › 2017 › Forte S › Repair and Diagnosis › External Pages › Different variant/trim › Section 3 (Engine Control System - 2.0L GDI) › Variable Intake Solenoid (VIS) Valve › Repair Procedures › Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF.
  2. Disconnect the VIS valve connector.
  3. Measure resistance between VIS valve terminals 1 and 2.

    Specification:  30.0 - 35.0 [20°C (68°F)]

About FixVault