FixVault
Home › Kia › 2017 › Niro EX › Repair and Diagnosis › Drivelines & Axles › Axle Shafts › Driveshaft Assembly › Dynamic Damper › Repair Procedures › Replacement

Repair Procedures: Replacement

  1. Remove the front driveshaft.

    (Refer to Driveshaft Assembly - "FRONT DRIVESHAFT ")

  2. Remove the TJ joint assembly.

    (Refer to Driveshaft Assembly - "TJ JOINT ")

  3. Remove the remove the both side of band (B) of the dynamic damper (A).
    Fig 1: Removing Both Side Of Band Of Dynamic Damper
    G12329310Courtesy of KIA MOTORS AMERICA, INC.
  4. Fix the driveshaft (A) with a vice (B) as illustrated.
    Fig 2: Fixing Driveshaft With Vice
    G12329311Courtesy of KIA MOTORS AMERICA, INC.
  5. Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper when the dynamic damper is removed.
  6. Separate the dynamic damper (A) from the shaft (B) carefully.
Fig 3: Separating Dynamic Damper From Shaft
G12329312Courtesy of KIA MOTORS AMERICA, INC.
About FixVault