Repair Procedures: Inspection
- Measure the output voltage between the terminal of the wheel speed sensor and the body ground.
CAUTION:
In order to protect the wheel speed sensor, a 100 Ω resistor must be used when measuring output voltage.
Courtesy of KIA MOTORS AMERICA, INC.
- Compare the change in the output voltage of the wheel speed sensor to the normal change in the output voltage as shown below.
Courtesy of KIA MOTORS AMERICA, INC.
- V_low: 0.59V - 0.84V
- V_high: 1.18V - 1.68V
- Frequency range: 1 - 2, 500Hz