FixVault
Home › Kia › 2017 › Optima EX › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.4L (Except HEV) › Camshaft Position Sensor (CMPS) › Repair Procedures › Removal › [Bank 1/Intake]

[Bank 1/Intake]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor.
Fig 1: Disconnecting Camshaft Position Sensor Connector
G12146867Courtesy of KIA MOTORS AMERICA, INC.
About FixVault