Repair Procedures: Inspection

1. Disconnect the ignition switch connector (B) and key switch connector (A) from under the steering column.
   Fig 1: Disconnecting Ignition Switch Connector And Key Switch Connector

   Courtesy of KIA MOTORS AMERICA, INC.
2. Check for continuity between the terminals.
3. If continuity is not specified, replace the switch.

Fig 2: Ignition Switch Connector Terminal Chart

Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Checking Continuity Between Ignition Switch Connector Terminal

Courtesy of KIA MOTORS AMERICA, INC.