FixVault
Home › Kia › 2017 › Rio SX › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System › Crankshaft Position Sensor (CKPS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) after removing the installation bolt.
Fig 1: Locating Crankshaft Position Sensor And Connector
G11845145Courtesy of KIA MOTORS AMERICA, INC.
About FixVault