FixVault
Home › Kia › 2017 › Rio SX › Repair and Diagnosis › Engine Performance › Engine Control Systems › Idle Stop And Go (ISG) System › Oil Pump Unit (OPU) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Remove the negative (-) battery terminal.
  2. Remove the crash pad lower panel. (Refer to "CRASH PAD ".)
  3. Remove the oil pump unit connector to the left side of the brake pedal.
  4. Remove the oil pump unit (A) after removing the nuts (3ea).
Fig 1: Removing Oil Pump Unit
G11845292Courtesy of KIA MOTORS AMERICA, INC.
About FixVault