FixVault
Home › Kia › 2017 › Rio SX › Repair and Diagnosis › Engine Performance › Engine Control Systems › Idle Stop And Go (ISG) System › Seat Belt Switch › Repair Procedures › Inspection

Repair Procedures: Inspection

  1. Remove the connector from the switch.
  2. Check for continuity between terminals.
    Seat Belt Condition Continuity
    Fastened Non-Conductive (∞Ω)
    Not fastened Conductive (Ω)
    Fig 1: Locating Seat Belt Switch
    G11845297Courtesy of KIA MOTORS AMERICA, INC.
About FixVault