FixVault
Home › Kia › 2017 › Rio SX › Repair and Diagnosis › Restraints › Air Bag, SRS › Supplemental Restraint System Control Module And Sensors › SRS Control Module (SRSCM) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Remove the ignition key from the vehicle.
  2. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  3. Remove the floor console.

    (Refer to "CONSOLE ")

  4. Remove the rear heating joint duct (A).
    Fig 1: Removing Rear Heating Joint Duct
    G11845905Courtesy of KIA MOTORS AMERICA, INC.
  5. Pull up the lock, of the SRSCM connector, the disconnect the connector (A).
    Fig 2: Locating Connector
    G11845906Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the SRSCM mounting nuts (3EA) from the SRSCM, then remove the SRSCM.
About FixVault