FixVault
Home › Kia › 2017 › Rio SX › Repair and Diagnosis › Restraints › Air Bag, SRS › Supplemental Restraint System Control Module And Sensors › Weight Classification System (WCS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the front passenger seat assembly.

    (Refer to "FRONT SEAT" )

  3. Remove the seat track assembly.

    (Refer to "FRONT SEAT" )

    NOTE:
    • There are several DTC cases, please check below status.
      Case A B1763 OCS ECU Defect
      Case B B1323 OCS Sensor Defect
      Case C B1319 OCS Required Weight Check
      Case D B1697 ACU Communication error
    • Case A. B. Remove the seat track assembly of the front passenger seat. After replacing, perform WCS reset and DTC clear.
    • Case C. Perform WCS reset and accuracy check, if accuracy check result is accepted and DTC is historic, WCS can be re-used.
    • Case D. Check wirings and connectors. If there is no DTC after WCS reset and DTC clear, WCS can be re-used.
About FixVault