Repair Procedures: Removal

[LH]

1. Disconnect the negative (-) battery terminal.
2. Remove the tail gate trim [LH].

   (Refer to Body - "TAIL GATE TRIM ")

3. Disconnect the STG spindle connector (A).
   Fig 1: Locating STG Spindle Connector

   Courtesy of KIA MOTORS AMERICA, INC.
4. Using a screwdriver, loosen the bracket (B) mounting bolts after lifting the socket clips (A) up slightly.
5. Remove the STG spindle assembly (C).

Tightening torque: 

6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

Fig 2: Locating STG Spindle Assembly

Courtesy of KIA MOTORS AMERICA, INC.

[RH]

1. Disconnect the negative (-) battery terminal.
2. Remove the luggage side trim [RH].

   (Refer to Body - "LUGGAGE SIDE TRIM ")

3. Remove the tail gate trim [RH].

   (Refer to Body - "TAIL GATE TRIM ")

4. Pull up the bottom of rear A/C duct (A).
   Fig 3: Pull Up Bottom Of Rear A/C Duct

   Courtesy of KIA MOTORS AMERICA, INC.
5. Remove the third row seat belt upper anchor (A) after loosening the bolt.

   Tightening torque: 

   39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

   Fig 4: Locating Third Row Seat Belt Upper Anchor With Bolt

   Courtesy of KIA MOTORS AMERICA, INC.
6. Loosen the mounting bolt (A).
   Fig 5: Locating Mounting Bolt

   Courtesy of KIA MOTORS AMERICA, INC.
7. Remove the rear A/C duct (A) after loosening the bolt.
   Fig 6: Locating Rear A/C Duct With Bolt

   Courtesy of KIA MOTORS AMERICA, INC.
8. Disconnect the STG spindle connector (A).
9. Using a screwdriver, loosen the bracket (B) mounting bolts after lifting the socket clips (A) up slightly.
10. Remove the STG spindle assembly (C).

    Tightening torque: 

    6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 Ib-ft)

    Fig 7: Locating STG Spindle Assembly

    Courtesy of KIA MOTORS AMERICA, INC.