Repair Procedures: Removal

CAUTION: Put on gloves to protect your hands.

NOTE: Use seat covers to avoid damaging any surfaces.

Remove the luggage side trim.
(Refer to Interior Trim "LUGGAGE SIDE TRIM ")
Remove the roof trim assembly.
(Refer to Roof Trim - "ROOF TRIM ASSEMBLY ")
Loosen the bolt and remove the third row seat belt upper anchor (A).

Fig 1: Locating Third Row Seat Belt Upper Anchor With Bolt
Courtesy of KIA MOTORS AMERICA, INC.
Loosen the bolt and remove the rear air conditioning duct (A).

Fig 2: Locating Rear Air Conditioning Duct With Bolt
Courtesy of KIA MOTORS AMERICA, INC.
Loosen the quarter fixed glass (A) mounting nuts.

Fig 3: Locating Quarter Fixed Glass With Mounting Nuts
Courtesy of KIA MOTORS AMERICA, INC.
Cut out the sealant from the quarter fixed glass using the utility knife.
NOTE: Do not scrape down to the painted surface of the body; damaged paint will interfere with proper bonding.

Information
- Remove the rubber dam and fasteners from the body.
- Mask off surrounding surfaces before painting.
Remove the quarter fixed glass.