Repair Procedures: Installation

Install the #1, #2 cylinder bore water jacket separators (A).

Fig 1: Locating #1, #2 Cylinder Bore Water Jacket Separators
Courtesy of KIA MOTORS AMERICA, INC.

NOTE: Insert the separator align into the block inner side protrusion making sure that it is located below the cylinder head installing surface.

Fig 2: Insert Separator Align Into Block Inner Side Protrusion
Courtesy of KIA MOTORS AMERICA, INC.

Fig 3: Locating Water Jacket Separator Installed Correctly
Courtesy of KIA MOTORS AMERICA, INC.
Install the LH/RH cylinder head assembly and gasket.
(Refer to Cylinder Head Assembly - "CYLINDER HEAD ")