FixVault
Home › Kia › 2017 › Sedona L › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System › Heated Oxygen Sensor (HO2S) › Repair Procedures › Removal › [Bank 1/Sensor 1]

[Bank 1/Sensor 1]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the connector (A).
    Fig 1: Locating Heated Oxygen Sensor Connector (Bank 1/Sensor 1)
    G12274634Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the heated oxygen sensor (A).
    Fig 2: Locating Heated Oxygen Sensor (Bank 1/Sensor 1)
    G12274635Courtesy of KIA MOTORS AMERICA, INC.
About FixVault