FixVault
Home › Kia › 2017 › Sedona SX › Repair and Diagnosis › Brakes › Traction Control › Electronic Stability Control (ESC) System › Rear Wheel Speed Sensor › Repair Procedure › Removal

Repair Procedure: Removal

  1. Remove the rear wheel speed sensor connector (A).
    Fig 1: Locating Rear Wheel Speed Sensor Connector
    G12274081Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the rear wheel speed sensor.

    (Refer to Driveshaft and Axle - "REAR HUB - CARRIER ")

  3. Install in the reverse order of removal.
About FixVault