Repair Procedures: Removal

Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
Remove the resonator and the air intake hose.
(Refer to INTAKE & EXHAUST SYSTEM - 2.0L T )
Remove the intercooler inlet pipe & hose assembly (A).

Fig 1: Locating Intercooler Inlet Pipe & Hose Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the ETC module connector (A).
Disconnect the coolant hoses (B).
Remove the installation bolts (C), and then remove the ETC module from the engine.

Fig 2: Locating ETC Module Connector, Coolant Hoses & Installation Bolts

Courtesy of KIA MOTORS AMERICA, INC.