FixVault
Home › Kia › 2017 › Sorento L › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.4L › ETC (Electronic Throttle Control) System › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the resonator and the air intake hose (Refer to "INTAKE AND EXHAUST SYSTEM " ).
  3. Disconnect the ETC module connector (A).
  4. Disconnect the coolant hoses (B).
  5. Remove the installation bolts (C), and then remove the ETC module from the engine.
Fig 1: Disconnecting ETC Module Connector
G12180200Courtesy of KIA MOTORS AMERICA, INC.
About FixVault