Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.

NOTE:

Be careful not to damage the O-ring (A). If the O-ring is damaged, replace with a new one.
Smear and cover splines (B) with molybdenum type high pressure grease.
GREASE SPL-1 or equivalent

Fig 1: Locating O-Ring And Cover Splines
Courtesy of KIA MOTORS AMERICA, INC.
Install the propeller shaft so that the runout markings (Transfer assembly 1ea, propeller shaft 1ea) are close to each other.

Fig 2: Propeller Shaft Installation Position

Courtesy of KIA MOTORS AMERICA, INC.