FixVault

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.

Information 

  1. Remove the under cover.

    (Refer to "ENGINE ROOM UNDER COVER ")

  2. Remove the oil filler plug (A).

    Gasoline 2.0/2.4 

    Fig 1: Locating Oil Filler Plug (Gasoline 2.0/2.4)
    G12171765Courtesy of KIA MOTORS AMERICA, INC.

    Gasoline 3.3 

    Fig 2: Locating Oil Filler Plug (Gasoline 3.3)
    G12171766Courtesy of KIA MOTORS AMERICA, INC.
  3. Check the oil level.

    Information 

    Oil level must be up to fill the hole, if not, add oil until it runs over.

    Fig 3: Checking Oil Level
    G12171767Courtesy of KIA MOTORS AMERICA, INC.
  4. Install the oil filler plug with new gasket.

    Tightening torque: 

    39.2~58.8N.m (4.0~6.0kgf.m, 28.9~43.4lb-ft)

  5. Install the under cover.

(Refer to "ENGINE ROOM UNDER COVER ")