FixVault
Home › Kia › 2017 › Soul + › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.0L › Camshaft Position Sensor (CMPS) › Repair Procedures › Removal › [Bank 1/Exhaust]

[Bank 1/Exhaust]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the mounting bolt (B), and then remove the sensor.
Fig 1: Locating Camshaft Position Sensor Connector And Mounting Bolt (Bank 1/Exhaust)
G12239126Courtesy of KIA MOTORS AMERICA, INC.
About FixVault