FixVault
Home › Kia › 2017 › Soul + › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 2.0L › Crankshaft Position Sensor (CKPS) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) after removing the mounting bolt.
Fig 1: Locating Crankshaft Position Sensor Connector
G12239118Courtesy of KIA MOTORS AMERICA, INC.
Fig 2: Locating Crankshaft Position Sensor
G12239119Courtesy of KIA MOTORS AMERICA, INC.
About FixVault