FixVault

Repair Procedures: Removal

  1. Remove the ignition key from the vehicle.
  2. Disconnect the battery negative cable and wait for at least three minutes before beginning to work.
  3. Disconnect the DAB, PAB, SAB, CAB and BPT connectors.
  4. Remove the floor console.

    (Refer to Body - "FLOOR CONSOLE ")

  5. Remove the rear heating joint duct (A).
    Fig 1: Locating Rear Heating Joint Duct
    G11933764Courtesy of KIA MOTORS AMERICA, INC.
  6. Pull up the lock of the SRSCM connector and disconnect the connector (A).
    Fig 2: Locating SRSCM Connector
    G11933765Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the SRSCM mounting bolts (3EA) from the SRSCM, and then remove the SRSCM.
    Fig 3: Locating SRSCM Mounting Bolts
    G11933766Courtesy of KIA MOTORS AMERICA, INC.