Component Replacement After Deployment
NOTE:
Before doing any SRS repairs, use the GDS to check for DTCs. Refer to the DTC INDEX
for repairing of the related DTCs.
When the front airbag(s) deployed after a collision, replace the following items.
- SRSCM
- Deployed airbag(s)
- Seat belt pretensioner(s)
- Emergency fastening device
- Front impact sensors
- Inspect the clock spring for heat damage.
If any damage is found, replace the clock spring.
When the side/curtain airbag(s) deployed after a collision, replace the following items.
- SRSCM
- Deployed airbag(s)
- Side impact sensor(s) on the deployed side(s)
When the vehicle is completely repaired, verify that the SRS airbag system is OK.
- When the ignition switch is turned ON, the SRS indicator should come on for about 6 seconds before going off.