Repair procedures: Inspection
- Switch "OFF" the ignition.
- Disconnect the OPS connector.
- Remove the OPS.
- After immersing the thermistor of the sensor into engine coolant, measure resistance between the OPS terminals 2 and 4.
- Check that the resistance is within the specification.
OIL TEMPERATURE SENSOR VOLTAGE SPECIFICATIONS
| Pressure (Bar) | Output Voltage (V) [Vref=5V] |
|---|---|
| 0 | 0.46 - 0.54 |
| 2 | 1.25 - 1.35 |
| 4 | 2.05 - 2.15 |
| 6 | 2.84 - 2.96 |
| 10 | 4.42 - 4.58 |