Component Replacement After Deployment

NOTE: Before doing any SRS repairs, use the KDS/GDS to check for DTCs. Refer to the DTC INDEX Diagnostic Trouble Code list for repairing of the related DTCs.

When the front airbag(s) deployed after a collision, replace the following items.

SRSCM
Deployed airbag(s)
Seat belt pretensioner(s)
Front impact sensors
Inspect the clock spring for heat damage.
If any damage found, replace the clock spring.

When the side/curtain airbag(s) deployed after a collision, replace the following items.

SRSCM
Deployed airbag(s)
Side impact sensor(s) for the deployed side(s)

After the vehicle is completely repaired, confirm the SRS airbag system is OK.

Turn the ignition switch ON; the SRS indicator should come on for about six seconds and then go off.